Dukes Group Legacy Aged Copper

Overview

From Dukes Group’s Legacy line, Aged Copper is an oak engineered hardwood. Per our product page, Aged Copper is 7-1/2″ wide, 5/8″ thick, 3mm top layer; lengths of 74.8″. Details: grade: prime; surface: wire-brushed; finish: UV water-based matte lacquer; core: baltic birch plywood. Installation: glue down, nail/staple with glue assist, floating. Each box covers 23.32 sq ft. Manufacturer item number: 190-15-8. Visit our Woodland Hills showroom to see Aged Copper in person, or request pricing and a free in-home estimate.

Specifications

Color and Appearance

Dukes Group does not publish a written description for Aged Copper, so we recommend seeing it in person in our showroom or at home before you decide. Because it is real wood, every plank is different.

Construction

Engineered construction pairs a real hardwood wear layer with a cross-layered core. It moves less than solid wood through Southern California’s dry Santa Ana winds and seasonal humidity changes. The 3mm top layer leaves material for future sanding and refinishing.

Installation

Our crews check your subfloor for moisture and flatness, acclimate the flooring, and install it to Dukes Group’s published instructions. Learn more about our hardwood flooring installation.

Delivery and Pickup

Dukes Group flooring is ordered through the distributor. Call to confirm current availability and lead time, and ask about delivery to your home or job site, or pickup from our store.

See It in Person

Visit our showroom at 21030 Victory Blvd, Woodland Hills (Mon–Wed & Fri 10–6, Thu 10–4, Sat 10–5, Sun closed), or request a free in-home estimate.

Care

• Sweep or vacuum (hard-floor setting) regularly to remove grit.
• Clean with a barely damp mop and a cleaner made for finished wood floors. Never wet-mop or steam.
• Use felt pads under furniture and mats at entries.
• Keep indoor humidity steady to limit seasonal gaps.

Warranty Summary

Dukes Group publishes warranty details in its downloads section. Ask us for a copy before you order. Read the full terms on Dukes Group’s warranty page.

More From Dukes Group Legacy

• Dukes Group Legacy Almond engineered oak
• Dukes Group Legacy Wheat engineered oak
• Dukes Group Legacy Latte engineered oak
• Dukes Group Legacy Sauvignon engineered oak

Frequently Asked Questions

How much does Dukes Group Legacy Aged Copper cost?

We quote Dukes Group flooring by project, because the final price depends on square footage, current distributor pricing and whether you need installation. Call (818) 963-0878 or use the form below for current pricing and availability.

Can I see this floor in person before I buy?

Yes. See it in person at our Woodland Hills showroom.

Can it go over concrete?

Engineered hardwood can usually be glued down or floated over a dry, flat slab after a moisture test. We check your subfloor during the estimate and follow Dukes Group’s installation guidelines.

Do you install Dukes Group flooring?

Yes. Our installers handle subfloor checks, moisture testing, acclimation, installation and finishing details.

Wood is a natural material. Color, grain and character vary from board to board, and screens and lighting change how a floor looks. Please contact us or visit our Woodland Hills showroom to see it in person before ordering.

Also see: flooring installation · current flooring specials · contact and directions

Request Pricing & Availability