Glamour Flooring is a family business that has supplied and installed hardwood floors since 2007 (CSLB #1005283). Most Los Angeles projects start with one question: which floor will look right and hold up in this particular house? We answer it by checking the subfloor, the light and how each room is used before we recommend a product.
The floor we’re asked about most is European white oak engineered hardwood. We carry it in 2mm, 4mm and 6mm wear layers, and other European white oak floors are available quickly through our suppliers. A thicker wear layer leaves more real wood on top for future sanding. The engineered core moves less than solid wood when Santa Ana winds dry the air or humidity climbs, which is why it is usually our pick for glue-down installs over concrete slab. Comparing it with vinyl plank for the whole house? See engineered hardwood vs. luxury vinyl plank.
Installation is done by our licensed flooring contractor team: removing the old floor, testing for moisture, prepping the subfloor, installing, and finishing stair nosing, vents and transitions. In September 2026, for example, on a recent project we installed European white oak engineered hardwood through the living room, kitchen, primary bedroom and a second unit.
We work across Los Angeles, including Westside neighborhoods such as Brentwood and Pacific Palisades, and Valley neighborhoods such as Sherman Oaks and Encino. Our only showroom is at 21030 Victory Blvd, Woodland Hills. Call ahead and we’ll have a matching sample ready for you there, or book a free in-home estimate and we’ll bring flooring samples to your home, measure, and write your quote.
Hardwood supply and installation in one written estimate
Buy the floor from us and have us install it as your licensed flooring contractor, or buy material only. Hardwood floors start at $3.49/sq ft, material only; installation is priced separately and depends on your house. Delivery available, charged separately based on job site location and project size.
Hardwood we supply and install in Los Angeles
- European white oak: wide planks from 7.5″ to 13″, in 2mm, 4mm and 6mm wear layers
- Engineered hardwood in oak, hickory, maple and walnut, the right choice for most slab homes
- Solid hardwood over raised wood subfloors
- Herringbone and chevron patterns, laid out around your rooms and transitions before installation starts
- Matching stair treads, risers and nosing
What your written estimate includes
We measure every room and check the subfloor before we price the job. Each part of the work is listed on its own line:
- Hardwood material by the square foot, with the extra needed for cuts and patterns
- Removal and haul-away of the old floor
- Moisture testing on concrete slabs, and subfloor leveling where it’s needed
- Installation by method: nail-down, glue-down or floating
- Stairs, transitions and baseboard
- Delivery, charged separately based on job site location and project size
What moves the price: solid or engineered construction, species, plank width and grade, patterns such as herringbone, total square footage, how much leveling the subfloor needs, and the number of stairs.
Recent hardwood jobs in Los Angeles

Los Angeles: wide-plank European oak and a matching staircase
Urban Floor Brindisi in 9.5″ planks through the upstairs hallway and bedrooms, then new hardwood treads, stair noses and white risers on the staircase.
See the Los Angeles floor and stair job

Encino: engineered hardwood glued down on slab
About 600 sq ft of tile and carpet taken out, the slab ground and leveled, then Provenza Antico Relic engineered hardwood glued down. Two days from demolition to finished floor.
Read about the Encino installation

Woodland Hills: French oak over a leveled subfloor
California Classics Aegean French oak, 8″ wide and wire-brushed, glued down after we cleaned old adhesive off the plywood subfloor and poured self-leveler where it was needed.
See the Woodland Hills French oak job